How to hack a Bosch Performanceline CX Speed limiter (Trek EBike)

This project requires a bit of soldering experience, but is possible for a moderately skilled DIYer. Feel free to create your own fork of my code if you like. If you have questions, feel free to ask. This hack will work with almost any EBike. Code can be found here: https://github.com/Highervoltageprojects/Higher-Voltage Parts: Arduino - https://www.sparkfun.com/products/11113 FTDI Programmer - https://www.sparkfun.com/products/9718 Prototyping board - https://www.sparkfun.com/products/13268 Header pins - https://www.sparkfun.com/products/116 Voltage regulator - https://www.pololu.com/product/3794 Light cable - https://shop-usa.scooteretti.com/products/bosch-light-cable 390 Ohm resistor - https://www.digikey.com/product-detail/en/stackpole-electronics-inc/CF14JT390R/CF14JT390RCT-ND/1830340 51K resistor - https://www.digikey.com/product-detail/en/stackpole-electronics-inc/CF14JT51K0/CF14JT51K0CT-ND/1830392 Omron relay - https://www.digikey.com/products/en?keywords=omron%20355cr Many of these parts can be found on Ebay or Amazon for less if you are willing to look around.